The Honda radio code is a password that unlocks the radio when power has been lost. It is a unique 4 to 5-digit number given to the vehicle’s factory-installed stereo or navigation system.
This Honda stereo code sounds normal, but it is one of the most important safety features in a car. Let’s take an instance, you disconnect your car battery, replace the alternator, or jump-start the car, you will definitely need this code.
Well, in this guide, I’ll guide you on how to get the Honda stereo code and how to get it by VIN.
Let’s begin!
How to Get the Honda Radio Code?
Normally, you can usually find your Honda stereo code in the car owner’s manual or glovebox. It is labeled on a small card sticker. You can also find the code insdie the glove compartment or door jamb sticker on some car models.
You can contact a Honda dealer who can help retrieve it using your vehicle’s details. Lastly, you can get it online on the official Honda website using your VIN and radio serial number.
You should learn about airbag system with this detailed guide!
Let me explain further!
To reset the radio code for a Honda, it is possible to either visit the Honda office for assistance or find the reset code independently. This process usually requires the vehicle’s VIN (Vehicle Identification Number) and the serial number of the radio device. This information is essential to successfully retrieve the radio reset code.
Get Your VIN Number
To get the unlock code for your vehicle, you will need to locate your Vehicle Identification Number (VIN). The VIN is a unique 17-digit code that can be found in several places, including the driver’s side base of the front windshield, on your vehicle registration documents, and on your insurance card or proof of insurance.
The VIN can also be located in the new owner surveys or customer satisfaction surveys from Honda, in case you just got one. It’s important to note that VINs do not use the letters I, O, and Q; instead, if you notice what appears to be these letters, substitute a zero for the letter O and a one for the letter I.
Ensure that you accurately identify your VIN to successfully retrieve the unlock code.
Get The Vehicle Serial Number
To obtain the unlock radio code for your vehicle, it is essential to locate its serial number, which is associated with the radio device rather than the vehicle itself. For 2013 and 2014 Honda Odyssey and Pilot models, there is no need for a radio unlock code.
Detailed instructions regarding your radio and navigation system can be found in your owner’s manual.
For Honda models manufactured in 2001 or earlier, the serial number is typically located on the back of the radio device, and it is advisable to visit Honda technicians for assistance in obtaining this number and learning how to reset your radio.
For Honda vehicles built after 2001, excluding those from 2013 and 2014, the serial number can usually be accessed via the device’s display. It may also be noted within the glove compartment.
To retrieve the serial number from the display, navigate to the code display screen, where a code beginning with the letter “U” will indicate the first part of your serial number. The second half will be prefixed by an “L,” resulting in a total of eight digits for the complete serial number.
You should also learn How to Reset an Airbag Light with this detailed guide!
How to Unlock The Navigation System
To unlock the navigation system on a 2003 to 2007 Accord, begin by turning the ignition to the ACC position and powering on the audio unit. If the display shows “COdE,” proceed; if not, remove the backup fuse for one minute and attempt again.
Next, turn off the audio unit. Simultaneously press and hold the tops of the SEEK/SKIP and CH/DISC bars while pressing and releasing the PWR/VOL knob. The code screens should then appear for input.
For other models, the process is slightly different. You start by turning the ignition to the ON position and powering on the audio device to check for “COde” on the display. If it does not appear, repeat the process of disconnecting the backup fuse for one minute.
Turn off the device, then press and hold radio presets 1 and 6 while turning the device back on. This action should enable the display of the code screens for unlocking.
Conclusion
It is frustrating to lose access to your car radio after changing the battery. However, The Honda stereo code is designed to protect your audio system from theft and keep your car secure.
Knowing your code and how to find it is necessary to get back the access. It is a quick and easy process if you have the code stored safely, maybe in your phone notes or in the owner’s manual.